The socket will accept a 2-pin 5. It may be suitable for others as well. DB-9 pin 2 connects to diode pin 11 TH. Socket for pin DIL package, specific layout. A positive pulse signal will be applied to one pin socket for the anode. A positive pulse will be applied to the diode anode pin Pin 14 will be made accessible through a solder terminal.
|Date Added:||25 May 2007|
|File Size:||21.60 Mb|
|Operating Systems:||Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X|
|Price:||Free* [*Free Regsitration Required]|
DB-9 pin 5 connects to diode pin 14 TEC. The socket will accept 8-pin TO packages.
DB-9 pin 5 connects to diode pin 7 TEC. Adds a rear-panel Ethernet connector, allowing the instrument to be remotely controlled using the VXI DB-9 pin 2 connects to diode pin 11 TH.
If a specific pinout option has been selected -P1B or -P1C, for instanceno additional information is required. One pin will be driven with dlode specified polarity, and one pin will be grounded. If the -T1B option is also ordered, pin 14 will be made accessible through a DB-9 connector instead, suitable for mating to a third-party temperature controller. Socket for 3-pin 5. All other pins will be grounded.
agtech Pelican model for half-rack-width 8. The user must confirm that the pulser polarity is appropriate for the DUT. Pins and will be grounded. The socket will accept pins of a standard butterfly package with 0.
40 Amp Pulsed Laser Diode Driver
Access to the photodiode, if present, is not provided. The rise times are less than ps. Both payments are non-refundable. Socket for pin DIL package, specific layout. This option is designed for compatibility with Thorlabs temperature controllers and certain QPhotonics laser diodes. Contact Avtech with the package’s exact mechanical drawings and pinout information. Each AVO-9 pulsed laser diode driver includes a customized high-speed socket for the user’s diode, offering ease of use without noticeably degrading performance!
DB-9 pin 2 connects to diode pin 1 TH. Negative output polarity -N 0 0 A polarity must be specified.
Datasheets, Manuals, and Prices for the Avtech AVO-9RA Laser Diode Driver (Pulsed Voltage)
A negative pulse will be applied to the diode cathode pin See the data sheet for details. The signal will be applied to one pin. This option requires the -P1B option.
This option is designed for compatibility with Thorlabs temperature controllers and Qphotonics laser diodes. Pins 3, 4, 6, and 7 of the diode are grounded. These prices are in U. The laser anode is on pin 1, and the laser cathode is on pin 3 and is common to the photodiode cathode and the case. This is a generic programming manual for all Avtech instruments.
200mA Pulsed Laser Driver
In particular, the VXI A positive pulse will be applied to the diode anode pin SI 32, V, 50 Hz. DB-9 pin 3 connects to diode qvtech 5 TH. Consult your local representative for pricing.